Wilderness Compact range
We think these lights not only look the part, they also deliver … they are very tough….. the market leading water and dust ingress rating of IP69K means the Compact 4 can actually be washed with a high pressure spray with a temperature of up to 90 degrees – this is the highest level achievable and usually found within the food industry for sterilising products.
Product Description:
The Wilderness Compact 4 range is available in flush and standard foot mount; both being available in flood, spot and diffused. The Compact range is E marked (for both light output and lens strength) and can be used whilst vehicles are in motion.
The Wilderness Compact 4 LED Spot Light range is made up of small, powerful and durable LED working lights, which produce a massive 3200 Lumens of light from 4 x 10 watt CREE LEDs giving visible beam distance of 780m. LED low energy consumption technology means they only consume 2.8 amps of power compare to a standard 55 watt halogen light which produce only 900 lumens of light while drawing 4.6 amps of power. This efficiency enables cabling and power management equipment to be down-sized, saving cost, space and weight.
We think these lights not only look the part, they also deliver … they are very tough….. the market leading water and dust ingress rating of IP69K means the Compact 4 can actually be washed with a high pressure spray with a temperature of up to 90 degrees – this is the highest level achievable and usually found within the food industry for sterilising products.
Because these lights are fully water and dust proof they are equally suitable for mounting on a boat and can be fully submersed in water for long periods.
The body (housing) of the light is made of weather-resistant and waterproof aluminium and coated with a UV-resistant paint to prevent chipping and fading for a lasting finish. The standard colour is black however we can supply these in a marine white finish or yellow finish (usually found within the quarry industry). The 3mm Lexan lenses used match the toughness of the aluminium housing; they are optically transparent yet unbreakable and scratch-resistant.
All Wilderness lights are supplied with a water proof Deutsche socket, together with a mating connector on a full wiring harness, including switch, power surge protection, relay and ring battery connections. The loom can be used to power the lights in a matter of seconds on a temporary basis or the individual components can be used on existing vehicle wiring for a permanent fix.
As with all Wilderness lights they are made to be used and abused …. Wilderness is so confident in the durability and build quality of its products, it offers a 3 year, no quibble, replacement warranty. Should a light stop working within 3 years of purchase, Wilderness will replace it free of charge. We admire the belief.
- 4 x 10 watt CREE white LED chips – 40 watts
- Massive 3200 LM of light produced while drawing only 2.8 Amp
- Spot light reflective beam pattern – 10 degrees
- Spot light beam distance – 780m
- Natural white light or Amber light option
- 50,000+ hour lifespan
- 5 years continuous use
- 94% optical reflector efficiency
- Unbreakable & scratch resistant lens on both sides
- 6063 Aluminum housing
- Durable UV resistant painting technology
- 9-36 Volt DC input
- Low power consumption
- Instant on/off, no warm up
- Over/under voltage protection
- Sealed waterproof connector
- Operating temp -40 ~ +145 deg
- IP69K Rating (water & dust proof at high pressure & high temperatures)
- CE & Rohs certification
- MIL810-STDG vibration certified
- Shock proof
- Salt & fog certified
- Waterproof housing
- Off road use only